400W 500W 600W 700W 800W NEW DEVELOPED WIND TURBINE GENERATOR WITH 6 BLADES FREE CONTROLLER FOR HOME ROOF
1. The product adopts A3 steel shell, which is small in size, light in weight, beautiful in appearance and small in vibration during work.
2. Good installation and connection strength, easy installation and maintenance
3. Using F-grade enameled wire, it can withstand high temperature up to 150 degrees, and it can also ensure the safe operation of the coil
4. The outer shell of the product is coated with Dacromet, and has undergone secondary anti-corrosion painting to ensure long-term operation without rust
|
Type Name |
TM-400 |
TM-500 |
TM-600 |
TM-700 |
TM-800 |
|
Rated power |
400W |
500W |
600W |
700W |
800W |
|
Max Power |
450W |
500W |
630W |
750W |
850W |
|
Rated Voltage |
12V/24V |
12V/24V/48V |
24V/48V |
24V/48V |
24V/48V |
|
Start-up wind speed |
2.0m/s |
2.0m/s |
3.0m/s |
3.0m/s |
3.0m/s |
|
Rated wind speed |
10m/s |
11.5m/s |
12m/s |
12m/s |
12m/s |
|
Working wind speed |
2.5~25m/s |
2.5~25m/s |
2.5~25m/s |
2.5~25m/s |
2.5~25m/s |
|
Safe wind speed |
55m/s |
55m/s |
50m/s |
55m/s |
55m/s |
|
Net weight |
15kg |
15.5kg |
16.5kg |
16.8kg |
17kg |
|
Rotor diameter |
1.6m |
1.6m |
1.8m |
1.9m |
1.9m |
|
Blade number |
3pieces |
||||
|
Blade material |
Nylon / Carbon |
||||
|
Electric generator |
Three-phase permanent magnet synchronous generator |
||||
|
Control system |
Electromagnetic/wind wheel side |
||||
|
Speed regulation mode |
Adjust the wind angel automatically |
||||
|
Working temperature |
-40° C~80° C |
||||
|
Tower form |
Independent/cable-tower |
||||
Products that rationally apply wind energy to businesses, universities, cities, utilities and other organizations, meaning procurement replaces potentially older, higher-emitting energy sources. Wind power continues to have the smallest carbon footprint of any energy source. It plays a vital role in the future of our nation's energy supply, supporting our world's energy transition and growing demand for sustainable energy resources.
Generator Wind Turbine has been designed to run for long periods without requiring any maintenance. Performance will be enhanced if you periodically inspect your system. Review the following simple maintenance procedures and implement every six months.
Caution: Do not go near the wind turbine during operation.
（1）Check blades for superficial damage. Replace blades if damaged. It is important not to use blades that are damaged, as you will lose overall balance, resulting in a decrease in efficiency. Should you notice damage to the blades, you must replace all 5. The blades are balanced as sets.
（2）Check the blade bolts and the nut for tightness.
（3）Check nose cone for cracks and tighten nuts.
（4）Wipe any excess dirt build-up from blades.
（5）Check electrical connections to make sure they are tight and free from corrosion.
（6）Lubricate the bearing to reduce the friction.
