300W 400W 24V 48V FACTORY WHOLESALE PORTABLE WIND TURBINE EOLIENNE VERTICALE

300W 400W 24V 48V FACTORY WHOLESALE PORTABLE WIND TURBINE EOLIENNE VERTICALE Featured Image
  • 300W 400W 24V 48V FACTORY WHOLESALE PORTABLE WIND TURBINE EOLIENNE VERTICALE
  • 300W 400W 24V 48V FACTORY WHOLESALE PORTABLE WIND TURBINE EOLIENNE VERTICALE
  • 300W 400W 24V 48V FACTORY WHOLESALE PORTABLE WIND TURBINE EOLIENNE VERTICALE

Short Description:

1.Various voltages. 3 phase AC output, suitable for charging 12V, 24V, 48V batteries.
2. One-piece Blade design ensures higher rotational stability, low noise.
3.Coreless generator means lower start torque, lower start wind speed, longer service life.
4. RPM limit protection. The RPM is kept under 300 regardless of high wind speed which prevents –the controller from over-load.
5.Easy installation. Full set of fasteners and installation tools are attached in the package.
6.Long service life. The turbine could work 10~15 years under normal natural environments

 

Product Detail

Product Tags

Product Features

1. The product adopts vertical wind turbine steering, so there is no need to worry about the lack of power caused by the change of wind direction
2. The fan blade material of the product is aluminum alloy, coupled with the optimization of aerodynamic design and structural design, the utilization rate of wind energy is high, the installation is convenient, and the transportation is convenient
3. There are reserved mounting holes for the installation of the product spindle clamp, which is convenient for installation and disassembly
4. The product is a bearingless permanent disk motor, no iron core, no hysteresis and cogging, low starting torque, no iron loss, high efficiency, compact structure, and high volume/performance ratio

Technical Parameters

Model R-300 R-400 R-600 R-800 R-1000
Generator power 300W 400W 600W 800W 1000W
Wheel diameter 0.9m 0.9m 0.9m 0.9m 0.9m
Turbine height 0.6m 0.6m 0.6m 0.6m 0.6m
Blades material Nylon fiber
Number of blades 5
Rated wind speed 11m/s
Start-up wind turbine 2m/s
Survival wind turbine 45m/s
Output voltage 12V/24v
Generator type 3 phase AC PMG
Control system Electromagnet
Speed regulation Automatically adjust windward direction
Lubrication way Lubrication grease
Working temperature From -40 to 80 centigrade

 

 

Difference between Electromagnet and Permanent Magnet

 

1. Unlike electromagnets, permanent magnets do not require any external power supply
2. The main difference between using electromagnets and permanent magnets in wind turbines is that electromagnets require slip rings to power the electromagnets whereas permanent magnets do not
3. Gearbox requires continuous maintenance, which increases the cost significantly, we can increase the efficiency of the turbine, reduce the efficiency and reduce the maintenance cost
4. The function of the gearbox is to convert the low speed of the turbine shaft to the higher speed required by the induction generator to generate electricity, but the gearbox causes friction and reduces performance

 

Servicing

Damage requiring service
Stop using the  Generator Wind Turbine and refer servicing to qualified service personnel under the following conditions：
If your  Generator Wind Turbine has been dropped or damaged in any way
When your  Generator exhibits a distinct change in performance

  • Previous:
  • Next:

    • Related Products

    600W 800W 1KW 24V 48V VERTICAL WIND TURBINE FOR HOME HYBRID STREETLIGHT

    600W 800W 1KW 24V 48V VERTICAL WIND TURBINE FOR...